DEXA is generally the more accurate of the two for a single body fat reading. It's commonly used as a reference method in research, and it adds bone density and a region-by-region breakdown that an InBody can't match. InBody is less dependable for any one reading, because hydration, food and recent exercise all move it, but it's quicker, cheaper per visit and often available at gyms. For tracking a body recomposition, the bigger factor is consistency: one machine, same conditions, scans spaced weeks apart. Switching between DEXA and InBody hides the very change you're trying to see.

Last updated: October 2026

"DEXA is the gold standard" is only half right

Everyone's heard it. Fewer people know what it leaves out.

DEXA (dual-energy X-ray absorptiometry) passes two low-dose X-ray beams through your body and uses the difference in how tissues absorb them to separate fat, lean soft tissue and bone mineral. That three-part split is why it's so detailed.

But DEXA still estimates. It relies on assumptions about lean tissue, including how much water that tissue holds, so anything that changes your hydration or stored carbohydrate can nudge the lean mass number. Different DEXA manufacturers, and even different software versions on the same machine, can report different results for the same person. In research, the method usually treated as the criterion is a multi-compartment model that combines several measurements, and DEXA is often checked against that.

So the more accurate framing: DEXA is the best practical reference most people can book. It isn't a perfect measurement, and two DEXA scans at two different clinics aren't automatically comparable either.

How InBody gets its number

InBody is a brand of bioelectrical impedance analysis, or BIA. It sends a small, painless electrical current through your body. Water conducts it well and fat conducts it poorly, so the machine estimates your total body water, then uses equations to work out lean mass and, from your weight, fat mass.

Everything flows from that water estimate. That's why InBody readings move with how hydrated you are, what you ate and whether you just trained. If you've ever suspected a gym scan was off because it disagreed with a DEXA, you weren't imagining the gap. If you want to know what each line on the printout means, our guide to inbody scan results explained walks through the sheet section by section, and the body composition scan app guide compares DEXA and BIA with other methods like calipers and camera apps.

Accuracy and repeatability are different questions

This is the nuance that matters most if you're recomping, and it's the one people skip.

  • Accuracy asks: how close is this reading to the truth?
  • Repeatability (researchers say precision) asks: if nothing about me changed, would I get the same reading twice?

For a one-time snapshot, accuracy matters. For tracking change over months, repeatability matters more. A machine that reads a little high but reads high consistently can still show you the direction you're heading. A machine that bounces around, or that you use under different conditions each time, can't.

A recomp makes this harder. You're hoping fat goes down while muscle holds or rises, often with little change on the scale. Those shifts are small, and between two scans they can be smaller than the normal wobble in the reading. Studies comparing InBody-style devices with DEXA often find the group averages line up reasonably well, while individual readings can differ noticeably, and the size and direction of that gap varies with the device and the people tested. I'm not going to put a number on it here, because the published figures depend heavily on which machines and which groups were studied.

What moves each reading

FactorDEXAInBody (BIA)
HydrationCan shift lean massLarge effect, since the estimate starts from body water
A meal or drink beforehandSmaller effectCan shift results noticeably
Training shortly beforeSmaller effectCan shift results noticeably
Positioning on the table or platformMatters; technicians standardize itMatters; stand the same way, hands and feet on the electrodes
Switching machinesDifferent makers and software can disagreeDifferent models can disagree
Bone densityMeasuredNot measured
Regional fat and lean massDetailedLean mass by limb and trunk; fat by region on some models

Neither column is a reason to skip scanning. It's a list of things to hold steady.

Which one should you choose?

My view: if you're tracking a recomp, you don't need DEXA every time. You need the same machine every time.

Here's how I'd decide:

  • You want one detailed baseline, or bone density matters to you. Book a DEXA. It's usually done at a clinic, lab or dedicated scanning business, costs more per visit than a gym InBody, and needs an appointment. Because it uses X-rays, even at a low dose, it isn't something you'd repeat weekly, and it isn't done during pregnancy.
  • You want to track change every few weeks. An InBody at your gym is the practical choice, as long as you scan under matching conditions: same time of day, similar food and water beforehand, no workout first.
  • You already have both. Keep them as two separate series. Compare DEXA to DEXA and InBody to InBody. If you change machines, treat the first scan on the new one as a new baseline.

What I wouldn't do is chase a different machine every time a number disappoints you. That's how you end up with five readings and no trend. And whatever the sheet says, it's a measurement on one morning, not a grade.

Keeping both kinds of scan in AllStrong

AllStrong reads scans rather than taking them. With Body Composition Scans, you photograph an InBody, DEXA or BIA printout, or pick a photo or screenshot of your results, and the app reads the numbers off the image: body fat percentage, muscle mass and BMR, plus body water, visceral fat and segmental lean mass when your printout lists them. You review the values before saving. A PDF won't upload, so screenshot it first.

Saved scans appear in Trends, with your latest numbers and a sparkline across recent scans. Given everything above, it's worth keeping a note of which machine produced each scan, so you only compare like with like. One caveat on my own advice: if you mix DEXA and InBody results into one history, the line will mix two methods too, and a jump between them may just be the switch.

Body Composition Scans is a Premium feature. Premium isn't sold on its own yet; it's included automatically when your gym runs AllStrong. Gym owners can read about the platform side on our gym management software page. And if you're logging food alongside your scans, the app that scans food for calories guide covers that side.

Frequently asked questions

Is DEXA more accurate than InBody?

For a single body fat reading, DEXA is generally considered more accurate, and it's commonly used as a reference method in research. It also measures bone density and gives a detailed regional breakdown. InBody readings depend more on hydration, food and recent exercise. Both are estimates, though, and for tracking change, scanning on the same machine under the same conditions matters more than which machine you choose.

Why are my DEXA and InBody body fat numbers different?

They measure different things and use different assumptions. DEXA separates fat, lean tissue and bone using two X-ray energies, while InBody estimates body water from an electrical current and calculates fat from that. Each also uses its own formulas. A gap between the two is normal. Track each method as its own series instead of comparing one against the other.

How often should I get a DEXA or InBody scan?

Space them weeks apart rather than days, because short-term readings mostly capture water and food changes. DEXA uses a low dose of X-rays and needs an appointment, so most people scan with it less often. InBody is easier to repeat, but only matching conditions make repeat scans comparable: same time of day, similar food and water, and no workout beforehand.

Can AllStrong read both DEXA and InBody results?

Yes. AllStrong's Body Composition Scans feature reads a photo of an InBody, DEXA or BIA printout, or a screenshot from your photo library, and you review the values before saving. PDFs aren't accepted, so screenshot them first. It's a Premium feature, and Premium is currently included automatically when your gym runs AllStrong rather than sold on its own.